BEGIN:VCALENDAR VERSION:2.0 PRODID:-//WEG Connect - ECPv6.15.18//NONSGML v1.0//EN CALSCALE:GREGORIAN METHOD:PUBLISH X-WR-CALNAME:WEG Connect X-ORIGINAL-URL:https://wegconnect.net X-WR-CALDESC:Events for WEG Connect REFRESH-INTERVAL;VALUE=DURATION:PT1H X-Robots-Tag:noindex X-PUBLISHED-TTL:PT1H BEGIN:VTIMEZONE TZID:America/New_York BEGIN:DAYLIGHT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 TZNAME:EDT DTSTART:20250309T070000 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:-0400 TZOFFSETTO:-0500 TZNAME:EST DTSTART:20251102T060000 END:STANDARD BEGIN:DAYLIGHT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 TZNAME:EDT DTSTART:20260308T070000 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:-0400 TZOFFSETTO:-0500 TZNAME:EST DTSTART:20261101T060000 END:STANDARD BEGIN:DAYLIGHT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 TZNAME:EDT DTSTART:20270314T070000 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:-0400 TZOFFSETTO:-0500 TZNAME:EST DTSTART:20271107T060000 END:STANDARD END:VTIMEZONE BEGIN:VEVENT DTSTART;TZID=America/New_York:20260413T080000 DTEND;TZID=America/New_York:20260417T170000 DTSTAMP:20260404T095257 CREATED:20260113T151944Z LAST-MODIFIED:20260306T143155Z UID:6698-1776067200-1776445200@wegconnect.net SUMMARY:Medium Voltage Drives & Soft-Starters Programming/Installation – Online Training via Microsoft Teams DESCRIPTION:This course provides participants with a comprehensive understanding of WEG medium-voltage drives and soft starters from a service and commissioning perspective. Designed for technicians and engineers\, the training covers installation\, programming\, preventive maintenance\, and troubleshooting of WEG MV products\, including MVW-01\, MVW-01 G4\, MVW3000\, MVW3000 G4\, and the SSW7000 soft starter. \nParticipants will gain hands-on knowledge navigating HMI interfaces\, reading and diagnosing parameters\, performing oriented start-ups\, and identifying and resolving common faults and alarms. Upon successful completion\, students will be prepared to commission\, maintain\, and troubleshoot WEG medium-voltage drives and soft starters in common industrial applications. \nObjectives \n\nTrain professionals to troubleshoot and service WEG medium-voltage drives and soft starters\nBuild confidence in diagnostics and preventative maintenance for MV applications\n\nWho Should Attend \n\n\nTechnicians or engineers with experience in low- or medium-voltage drives and soft starters \n\n\nWEG Authorized Automation Service Partners or those seeking authorization \n\n\nPrerequisites \n**In order to attend\, participants must complete and submit this form: WEG Drives and Softstarters Application Form ** \n\nModule 1 (LV – Online) completion\, or\n\nMinimum one year of experience with low-voltage drives and soft starters (any brand)\, or \n\n\nMinimum one year of experience with medium-voltage drives and soft starters (any brand) \n\n\nTraining Format\n \n\nOnline\n\nTotal training time: 24 hours \n\n\nRequired materials: \n\n\nLaptop with webcam and microphone URL:https://wegconnect.net/ip-events/medium-voltage-drives-soft-starters-programming-installation-online-training-via-microsoft-teams-2/ LOCATION:Microsoft Teams CATEGORIES:Service Center,Training ATTACH;FMTTYPE=image/jpeg:https://wegconnect.net/wp-content/uploads/2023/03/Training-e1679601405523.jpg ORGANIZER;CN="WEG Electric Corp":MAILTO:automationtech@weg.net END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260420T083000 DTEND;TZID=America/New_York:20260424T160000 DTSTAMP:20260404T095257 CREATED:20231016T181324Z LAST-MODIFIED:20251218T190011Z UID:2575-1776673800-1777046400@wegconnect.net SUMMARY:LV Drives and LV and MV SS Service Center Training. DESCRIPTION:This class provides Authorized WEG Automation Distributors an overview of the complete WEG Automation product offers including overview of available tools and resources to assist in specification and selling efforts.  Specific emphasis is focused on WEG Drive and Soft Starter offers. \nThe class will give participants the fundamental understanding required to install and start-up WEG low-voltage Drives and Soft Starters. Topics included; cold power checks and wiring confirmation\, programming common functions such as three-wire start\, accel/decel ramp\, min/max speed\, electronic potentiometer\, multi-speed\, PID loops\, and other application specific topics. \nParticipants will receive training on the configuration and application of WEG’s Pump Genius software including basic set up of the Pump Genius system and use of the Pump Genius wizard. With hands on demos the student will learn how to set up simplex and multiplex pump systems\, set up process set point and feedback control loops\, configure for direct and reverse control\, and set up and troubleshooting of faults and alarms. \nAttendees will also be automatically enrolled in the SSW7000 Medium Voltage Soft Starter – Start-up and Troubleshooting class providing students the opportunity to control and operate the WEG SSW7000 soft-starter\, understand and navigate programming hierarchy\, perform oriented start-ups\, and identify and troubleshoot basic faults.  Participation in this class is optional\, but recommended. \nObjective:  Provide Authorized WEG Automation Distributor Specialists the commercial and technical training needed to select\, sell and technically apply WEG Automation offers.  Participants who successfully complete the course will be authorized to start-up WEG Low Voltage Drives and Low and Medium Voltage Soft Starters. \nWho should attend:  WEG Distributor Drive Specialists who meet the identified program prerequisites listed below \nPrerequisites:  Completion and approval of the Automation Service Candidate Registration Form and WEG visit to candidate facility. \nTo begin the process please complete this form: Candidate Registration Form \nDuration:  5 Days \nWEG Automation Distributor Drives Specialist Training Syllabus \nTraining\, Travel\, and Housing Logistics FAQ \n*PLEASE DO NOT BOOK FLIGHTS OR HOTEL UNTIL CONFIRMATION* URL:https://wegconnect.net/ip-events/distributor-drives-specialist-training-6/ LOCATION:WEG Electric US Headquarters\, 6655 Sugarloaf Parkway\, Duluth\, GA\, 27502\, United States CATEGORIES:Distributor,Training ATTACH;FMTTYPE=image/png:https://wegconnect.net/wp-content/uploads/2023/08/compilation.png ORGANIZER;CN="WEG Electric Corp":MAILTO:automationtech@weg.net END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260505T080000 DTEND;TZID=America/New_York:20260508T170000 DTSTAMP:20260404T095257 CREATED:20251215T164752Z LAST-MODIFIED:20260116T134059Z UID:6540-1777968000-1778259600@wegconnect.net SUMMARY:Duluth\, GA - Regional Training DESCRIPTION:Welcome to the signup for WEG Automation University Regional Training in Duluth\, GA. \n Please review the following important information before registering: \n\n \n Registration is required to attend any class.\n Two (2) training rooms will be running concurrently\, so please ensure you do not select classes with overlapping times.\n If a class appears more than once on the schedule\, it is being offered multiple times during the week.\n Completion of required online training is mandatory prior to attending in-person regional training.\n Do not book travel or lodging until you receive confirmation that you are enrolled in the class and all prerequisites have been completed. A confirmation email will be sent once you are cleared to proceed.\n \n\n \n Schedule for Week\n \n \n Room Tuesday Wednesday Thursday Friday \n \n Room 1 Drives & Soft Starters Pump Genius \n Room 2 WEG Automation Products Selection and Sizing (Session 1) WEG Automation Products Selection and Sizing (Session 2) TPD500 Installation and Programming \n \n\n Class Descriptions\n\n \n \n \n Tuesday or Wednesday: Product Selection & Sizing \n \n\n \n \n Duration: \n One (1) day \n Overview: \n Learn how to select and size automation products effectively. This course covers combination starters\, contactors\, VFDs\, soft starters and more. This class is reinforced through hands-on labs. \n \n\n \n \n \n \n\n \n \n Session Details\n Prerequisites\n Class Topics \n Class Format\n\n \n  \n Who Is This Class For: \n Inside sales\, outside sales\, product specialists\, and engineers involved in motor control and panel design. \n \n\n \n   \n The student completed the following online classes before attending training: \n \n Electrical Basics \n Electrical Safety\n Electrical Drawings\n Common Standards\n Basics of Circuit Protection\n Power Factor Basics\n Motor Starting Methods\n Soft Start Basics\n VFD Basics\n Motor Basics\n WEG Control Product Overview\n WEG Drives and Soft Starter Overview\n \n \n This is approximately six (6) hours of online training. \n \n\n \n  \n COURSE OBJECTIVES: Upon completion of this course\, students will be able to: \n \n Select the best motor control solution for your application.\n Properly size a VFD\n Properly size a soft starter\n Learn available tools and resources to assist in specification and selling efforts.\n \n\n TOPICS \n \n Selecting the correct contactor and accessories\n Assembling a contactor\n Selecting the correct variable frequency drive (VFD)\n Selecting the correct soft starter\n \n \n \n\n \n  \n This one (1) day course is conducted from 8:00 a.m. to 5:00 p.m. and includes a 30 minute lunch break. The training format is designed to balance theory and application\, with approximately 70% instructor-led lecture and 30% hands-on exercises. \n \n\n \n \n \n \n \n \n Tuesday & Wednesday: Drives & Soft Starters \n \n\n \n \n \n \n \n \n \n Duration: \n Two (2) days \n Overview: \n Hands-on training covering WEG VFDs and soft starters\, focusing on installation\, startup\, and configuration of low-voltage drives.This class is only for the CFW and SSW product lines. \n \n\n \n\n \n \n Session Details\n Prerequisites\n Class Topics \n Class Format\n\n \n   \n Who Is This Class For: \n Product specialists and controls professionals seeking hands-on drive setup experience. \n \n WEG Training Safety Policy\n WEG offers a variety of training classes that involve hands-on work with low-level voltages (120 VAC\, 208 VAC\, and 460 VAC). To safeguard participants during these sessions\, WEG adheres to an Arc Flash Policy aligned with the standards set forth in NFPA 70E.\n\nAs part of these safety requirements\, all students must wear non-melting\, untreated\, natural fiber long pants while attending class. This clothing standard is mandatory to ensure personal protection when working with training equipment.\n \n \n \n\n \n  \n The student completed the following WEG Automation University online classe before attending training: \n \n Electrical Basics \n Electrical Safety\n Basics of Circuit Protection\n Motor Starting Methods\n Soft Start Basics\n VFD Basics\n Motor Basics\n WEG Drives and Soft Starter Overview\n SSW05 Product Overview\n SSW07 Product Overview\n SSW900 Product Overview\n CFW11 Product Overview\n CFW100 Product Overview\n CFW320 Product Overview\n CFW500 Product Overview\n CFW900 Product Overview\n \n \n This is approximately eight (8) hours of online training. \n \n\n \n  \n COURSE OBJECTIVES: Upon completion of this course\, students will be able to: \n \n Control and operate the WEG family of drives and soft starters\n Understand and navigate the programming hierarchy\n Perform oriented start-ups\n Use of WEG WPS software\n Identify and troubleshoot faults\n \n\n TOPICS \n \n Soft Starters (SSW07 & SSW900 Focused)\n Drives (CFW320\, CFW500\, & CFW900 Focused)\n HMI Navigation\n Oriented start-up\n Basic parameters\n PID control \n Networking Basics\n Fault descriptions and troubleshooting\n Using WEG WPS software\n\n \n \n \n\n \n  \n This two(2) day course is conducted from 8:00 a.m. to 5:00 p.m. and includes a 30 miute lunch break each day. The training format is designed to balance theory and application\, with approximately 30% instructor-led lecture and 70% hands-on exercises. \n\n Optional: Authorized start-up for WEG Low Voltage Drives and Low Voltage Soft Starters. To participate\, you must: \n \n Be an authorized WEG distributor\, system integrator\, or OEM. \n Complete the in-person hands-on test at the end of class. The test takes up to 2 hours to complete\, but most people complete it in under 1 hour. \n Complete a computer-based test within 30 days of completing the class\, which can take up to an additional 2 hours.\n \n\n\n \n \n \n \n \n \n \n \n \n \n\n \n \n \n \n \n Thursday & Friday: Pump Genius\n \n\n \n .\n Duration: \n Two (2) days \n Overview: \n Learn configuration and application of WEG’s Pump Genius through practical exercises. This class will cover Pump Genius on the CFW11\, CFW320\, CFW500\, and CFW900. \n \n\n \n \n \n \n\n \n \n Session Details\n Prerequisites\n Class Topics \n Class Format\n\n \n  \n Who Is This Class For: \n Product specialists and controls professionals who have completed Basic Drives & Soft Starters. \n \n WEG Training Safety Policy\n WEG offers a variety of training classes that involve hands-on work with low-level voltages (120 VAC\, 208 VAC\, and 460 VAC). To safeguard participants during these sessions\, WEG adheres to an Arc Flash Policy aligned with the standards set forth in NFPA 70E.\n\nAs part of these safety requirements\, all students must wear non-melting\, untreated\, natural fiber long pants while attending class. This clothing standard is mandatory to ensure personal protection when working with training equipment.\n \n \n \n\n \n  \n The student completed the following WEG Automation University online classes before attending training: \n \n Pump Genius Basics \n How a Centrifugal Pump Works\n \n \n This is approximately one (1) hour of online training. \n \n\n \n  \n COURSE OBJECTIVES: Upon completion of this course\, students will be able to: \n \n Use WEG WPS and WLP software for Pump Genius\n Setup Pump Genius for Simplex\, Multipump\, and Multiplex Pump Genius on the CFW500 and CFW900.\n Identify and troubleshoot faults.\n \n\n TOPICS \n \n Overview of Pump Genius in WPS and WLP software\n Overview of the CFW500 and CFW900 Simplex System\n Overview of the CFW500 and CFW900 Multipump System\n Overview of the CFW500 and CFW900 Multiplex System\n Features of Pump Genius on the CFW320 & CFW11\n\n \n \n \n\n \n  \n This two(2) day course is conducted from 8:00 a.m. to 5:00 p.m. and includes a 30 minute lunch break each day. The training format is designed to balance theory and application\, with approximately 30% instructor-led lecture and 70% hands-on exercises. \n\n Optional: Authorized start-up for WEG Low Voltage Drives and Low Voltage Soft Starters. To participate\, you must: \n \n Be an authorized WEG distributor\, system integrator\, or OEM. \n Complete the in-person hands-on test at the end of class. The test takes up to 2 hours to complete\, but most people complete it in under 1 hour. \n Complete a computer-based test within 30 days of completing the class\, which can take up to an additional 2 hours.\n \n\n\n \n \n \n \n \n \n \n \n \n Thursday & Friday: TPD500 Installation & Programming\n \n\n \n \n \n \n \n Duration: \n 2 days \n Overview: \n This course equips participants with the knowledge and practical skills to configure\, operate\, and maintain the WEG TPD500 DC drive system. The training blends classroom instruction with hands-on exercises. \n To attend this course you must be an authorized TPD partner. \n \n \n \n\n \n \n Session Details\n Prerequisites\n Class Topics \n Class Format\n\n \n  \n Who Is This Class For: \n Product specialists and controls professionals seeking hands-on DC Drive experience. \n \n WEG Training Safety Policy\n WEG offers a variety of training classes that involve hands-on work with low-level voltages (120 VAC\, 208 VAC\, and 460 VAC). To safeguard participants during these sessions\, WEG adheres to an Arc Flash Policy aligned with the standards set forth in NFPA 70E.\n\nAs part of these safety requirements\, all students must wear non-melting\, untreated\, natural fiber long pants while attending class. This clothing standard is mandatory to ensure personal protection when working with training equipment.\n \n \n \n\n \n   \n The student completed the following WEG Automation University online classes before attending training: \n \n Electrical Basics \n Electrical Safety\n Electrical Drawings\n Common Standards\n Basics of Circuit Protection\n Motor Basics\n DC Motor Basics\n WEG TPR500 Overview\n \n \n This is approximately five (5) hours of online training. \n \n\n \n  \n COURSE OBJECTIVES: Upon successful completion of this course\, participants will be able to: \n \n Learn how to select\, configure\, and maintain TPD500 drives\n Know how to use WEG_Express software for drive configuration\, monitoring\, and diagnostics\n Learn how to perform effective troubleshooting and maintenance procedures to reduce downtime\n Implement control strategies for common DC motor applications\, including winder systems\n \n \n\n TOPICS \n \n Overview of WEG_Express software\n Overview of the TPD500 family of drives\n HMI Navigation\n Basic parameters\n Fault descriptions and troubleshooting\n\n \n \n \n \n\n \n  \n This two(2) day course is conducted from 8:00 a.m. to 5:00 p.m. and includes a 30 minute lunch break each day. The training format is designed to balance theory and application\, with approximately 30% instructor-led lecture and 70% hands-on exercises. \n\n Optional: Authorized start-up for the WEG TPD500. To participate\, you must: \n \n Be an authorized WEG distributor\, system integrator\, or OEM. \n Complete the in-person hands-on test at the end of class. The test takes up to 2 hours to complete\, but most people complete it in under 1 hour. \n Complete a computer-based test within 30 days of completing the class\, which can take up to an additional 2 hours.\n \n\n\n \n \n \n \n \n \n\nNeed More Help? Click here for Training Event Support \n\n \n\n \n *** DO NOT BOOK ANY TRAVEL UNTIL YOU RECIVE CONFIRMATION EMAIL *** \n \n You will receive an email 3-4 weeks before the event confirming the event. If you register less than 4 weeks before the event you will be notified as soon as possible. \n All travel costs including but not limited to flights\, car rentals\, hotel\, and meals not during training are the responsibility of the attendee. URL:https://wegconnect.net/ip-events/duluth/ LOCATION:WEG Electric US Headquarters\, 6655 Sugarloaf Parkway\, Duluth\, GA\, 27502\, United States CATEGORIES:Distributor,Training ATTACH;FMTTYPE=image/png:https://wegconnect.net/wp-content/uploads/2025/12/CFW900.png ORGANIZER;CN="WEG Electric Corp":MAILTO:automationtech@weg.net END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260622T083000 DTEND;TZID=America/New_York:20260626T160000 DTSTAMP:20260404T095257 CREATED:20231016T181436Z LAST-MODIFIED:20251218T185947Z UID:2578-1782117000-1782489600@wegconnect.net SUMMARY:LV Drives and LV and MV SS Service Center Training. DESCRIPTION:This class provides Authorized WEG Automation Distributors an overview of the complete WEG Automation product offers including overview of available tools and resources to assist in specification and selling efforts.  Specific emphasis is focused on WEG Drive and Soft Starter offers. \nThe class will give participants the fundamental understanding required to install and start-up WEG low-voltage Drives and Soft Starters. Topics included; cold power checks and wiring confirmation\, programming common functions such as three-wire start\, accel/decel ramp\, min/max speed\, electronic potentiometer\, multi-speed\, PID loops\, and other application specific topics. \nParticipants will receive training on the configuration and application of WEG’s Pump Genius software including basic set up of the Pump Genius system and use of the Pump Genius wizard. With hands on demos the student will learn how to set up simplex and multiplex pump systems\, set up process set point and feedback control loops\, configure for direct and reverse control\, and set up and troubleshooting of faults and alarms. \nAttendees will also be automatically enrolled in the SSW7000 Medium Voltage Soft Starter – Start-up and Troubleshooting class providing students the opportunity to control and operate the WEG SSW7000 soft-starter\, understand and navigate programming hierarchy\, perform oriented start-ups\, and identify and troubleshoot basic faults.  Participation in this class is optional\, but recommended. \nObjective:  Provide Authorized WEG Automation Distributor Specialists the commercial and technical training needed to select\, sell and technically apply WEG Automation offers.  Participants who successfully complete the course will be authorized to start-up WEG Low Voltage Drives and Low and Medium Voltage Soft Starters. \nWho should attend:  WEG Distributor Drive Specialists who meet the identified program prerequisites listed below \nPrerequisites:  Completion and approval of the Automation Service Candidate Registration Form and WEG visit to candidate facility. \nTo begin the process please complete this form: Candidate Registration Form \nDuration:  5 Days \nWEG Automation Distributor Drives Specialist Training Syllabus \nTraining\, Travel\, and Housing Logistics FAQ \n*PLEASE DO NOT BOOK FLIGHTS OR HOTEL UNTIL CONFIRMATION* URL:https://wegconnect.net/ip-events/distributor-drives-specialist-training-7/ LOCATION:WEG Electric US Headquarters\, 6655 Sugarloaf Parkway\, Duluth\, GA\, 27502\, United States CATEGORIES:Distributor,Training ATTACH;FMTTYPE=image/png:https://wegconnect.net/wp-content/uploads/2023/08/compilation.png ORGANIZER;CN="WEG Electric Corp":MAILTO:automationtech@weg.net END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260706T080000 DTEND;TZID=America/New_York:20260710T170000 DTSTAMP:20260404T095257 CREATED:20260114T125202Z LAST-MODIFIED:20260114T150314Z UID:6701-1783324800-1783702800@wegconnect.net SUMMARY:Medium Voltage Drives & Soft-Starters Programming/Installation – Online Training via Microsoft Teams DESCRIPTION:This course provides participants with a comprehensive understanding of WEG medium-voltage drives and soft starters from a service and commissioning perspective. Designed for technicians and engineers\, the training covers installation\, programming\, preventive maintenance\, and troubleshooting of WEG MV products\, including MVW-01\, MVW-01 G4\, MVW3000\, MVW3000 G4\, and the SSW7000 soft starter. \nParticipants will gain hands-on knowledge navigating HMI interfaces\, reading and diagnosing parameters\, performing oriented start-ups\, and identifying and resolving common faults and alarms. Upon successful completion\, students will be prepared to commission\, maintain\, and troubleshoot WEG medium-voltage drives and soft starters in common industrial applications. \nObjectives \n\nTrain professionals to troubleshoot and service WEG medium-voltage drives and soft starters\nBuild confidence in diagnostics and preventative maintenance for MV applications\n\nWho Should Attend \n\n\nTechnicians or engineers with experience in low- or medium-voltage drives and soft starters \n\n\nWEG Authorized Automation Service Partners or those seeking authorization \n\n\nPrerequisites \n**In order to attend\, participants must complete and submit this form: WEG Drives and Softstarters Application Form ** \n\nModule 1 (LV – Online) completion\, or\n\nMinimum one year of experience with low-voltage drives and soft starters (any brand)\, or \n\n\nMinimum one year of experience with medium-voltage drives and soft starters (any brand) \n\n\nTraining Format\n \n\nOnline\n\nTotal training time: 24 hours \n\n\nRequired materials: \n\n\nLaptop with webcam and microphone URL:https://wegconnect.net/ip-events/medium-voltage-drives-soft-starters-programming-installation-online-training-via-microsoft-teams-3/ LOCATION:Microsoft Teams CATEGORIES:Service Center,Training ATTACH;FMTTYPE=image/jpeg:https://wegconnect.net/wp-content/uploads/2023/03/Training-e1679601405523.jpg ORGANIZER;CN="WEG Electric Corp":MAILTO:automationtech@weg.net END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260714T090000 DTEND;TZID=America/New_York:20260717T180000 DTSTAMP:20260404T095257 CREATED:20260109T132849Z LAST-MODIFIED:20260116T134152Z UID:6650-1784019600-1784311200@wegconnect.net SUMMARY:Chicago\, IL - Regional Training DESCRIPTION:Welcome to the signup for WEG Automation University Regional Training in Duluth\, GA. \n Please review the following important information before registering: \n\n \n Registration is required to attend any class.\n Two (2) training rooms will be running concurrently\, so please ensure you do not select classes with overlapping times.\n If a class appears more than once on the schedule\, it is being offered multiple times during the week.\n Completion of required online training is mandatory prior to attending in-person regional training.\n Do not book travel or lodging until you receive confirmation that you are enrolled in the class and all prerequisites have been completed. A confirmation email will be sent once you are cleared to proceed.\n \n\n \n Schedule for Week\n \n \n Room Tuesday Wednesday Thursday Friday \n \n Room 1 Drives & Soft Starters Pump Genius \n Room 2 WEG Automation Products Selection and Sizing (Session 1) WEG Automation Products Selection and Sizing (Session 2) TPD500 Installation and Programming \n \n\n Class Descriptions\n\n \n \n \n Tuesday or Wednesday: Product Selection & Sizing \n \n\n \n \n Duration: \n One (1) day \n Overview: \n Learn how to select and size automation products effectively. This course covers combination starters\, contactors\, VFDs\, soft starters and more. This class is reinforced through hands-on labs. \n \n\n \n \n \n \n\n \n \n Session Details\n Prerequisites\n Class Topics \n Class Format\n\n \n  \n Who Is This Class For: \n Inside sales\, outside sales\, product specialists\, and engineers involved in motor control and panel design. \n \n\n \n   \n The student completed the following online classes before attending training: \n \n Electrical Basics \n Electrical Safety\n Electrical Drawings\n Common Standards\n Basics of Circuit Protection\n Power Factor Basics\n Motor Starting Methods\n Soft Start Basics\n VFD Basics\n Motor Basics\n WEG Control Product Overview\n WEG Drives and Soft Starter Overview\n \n \n This is approximately six (6) hours of online training. \n \n\n \n  \n COURSE OBJECTIVES: Upon completion of this course\, students will be able to: \n \n Select the best motor control solution for your application.\n Properly size a VFD\n Properly size a soft starter\n Learn available tools and resources to assist in specification and selling efforts.\n \n\n TOPICS \n \n Selecting the correct contactor and accessories\n Assembling a contactor\n Selecting the correct variable frequency drive (VFD)\n Selecting the correct soft starter\n \n \n \n\n \n  \n This one (1) day course is conducted from 8:00 a.m. to 5:00 p.m. and includes a 30 minute lunch break. The training format is designed to balance theory and application\, with approximately 70% instructor-led lecture and 30% hands-on exercises. \n \n\n \n \n \n \n \n \n Tuesday & Wednesday: Drives & Soft Starters \n \n\n \n \n \n \n \n \n \n Duration: \n Two (2) days \n Overview: \n Hands-on training covering WEG VFDs and soft starters\, focusing on installation\, startup\, and configuration of low-voltage drives.This class is only for the CFW and SSW product lines. \n \n\n \n\n \n \n Session Details\n Prerequisites\n Class Topics \n Class Format\n\n \n   \n Who Is This Class For: \n Product specialists and controls professionals seeking hands-on drive setup experience. \n \n WEG Training Safety Policy\n WEG offers a variety of training classes that involve hands-on work with low-level voltages (120 VAC\, 208 VAC\, and 460 VAC). To safeguard participants during these sessions\, WEG adheres to an Arc Flash Policy aligned with the standards set forth in NFPA 70E.\n\nAs part of these safety requirements\, all students must wear non-melting\, untreated\, natural fiber long pants while attending class. This clothing standard is mandatory to ensure personal protection when working with training equipment.\n \n \n \n\n \n  \n The student completed the following WEG Automation University online classe before attending training: \n \n Electrical Basics \n Electrical Safety\n Basics of Circuit Protection\n Motor Starting Methods\n Soft Start Basics\n VFD Basics\n Motor Basics\n WEG Drives and Soft Starter Overview\n SSW05 Product Overview\n SSW07 Product Overview\n SSW900 Product Overview\n CFW11 Product Overview\n CFW100 Product Overview\n CFW320 Product Overview\n CFW500 Product Overview\n CFW900 Product Overview\n \n \n This is approximately eight (8) hours of online training. \n \n\n \n  \n COURSE OBJECTIVES: Upon completion of this course\, students will be able to: \n \n Control and operate the WEG family of drives and soft starters\n Understand and navigate the programming hierarchy\n Perform oriented start-ups\n Use of WEG WPS software\n Identify and troubleshoot faults\n \n\n TOPICS \n \n Soft Starters (SSW07 & SSW900 Focused)\n Drives (CFW320\, CFW500\, & CFW900 Focused)\n HMI Navigation\n Oriented start-up\n Basic parameters\n PID control \n Networking Basics\n Fault descriptions and troubleshooting\n Using WEG WPS software\n\n \n \n \n\n \n  \n This two(2) day course is conducted from 8:00 a.m. to 5:00 p.m. and includes a 30 miute lunch break each day. The training format is designed to balance theory and application\, with approximately 30% instructor-led lecture and 70% hands-on exercises. \n\n Optional: Authorized start-up for WEG Low Voltage Drives and Low Voltage Soft Starters. To participate\, you must: \n \n Be an authorized WEG distributor\, system integrator\, or OEM. \n Complete the in-person hands-on test at the end of class. The test takes up to 2 hours to complete\, but most people complete it in under 1 hour. \n Complete a computer-based test within 30 days of completing the class\, which can take up to an additional 2 hours.\n \n\n\n \n \n \n \n \n \n \n \n \n \n\n \n \n \n \n \n Thursday & Friday: Pump Genius\n \n\n \n .\n Duration: \n Two (2) days \n Overview: \n Learn configuration and application of WEG’s Pump Genius through practical exercises. This class will cover Pump Genius on the CFW11\, CFW320\, CFW500\, and CFW900. \n \n\n \n \n \n \n\n \n \n Session Details\n Prerequisites\n Class Topics \n Class Format\n\n \n  \n Who Is This Class For: \n Product specialists and controls professionals who have completed Basic Drives & Soft Starters. \n \n WEG Training Safety Policy\n WEG offers a variety of training classes that involve hands-on work with low-level voltages (120 VAC\, 208 VAC\, and 460 VAC). To safeguard participants during these sessions\, WEG adheres to an Arc Flash Policy aligned with the standards set forth in NFPA 70E.\n\nAs part of these safety requirements\, all students must wear non-melting\, untreated\, natural fiber long pants while attending class. This clothing standard is mandatory to ensure personal protection when working with training equipment.\n \n \n \n\n \n  \n The student completed the following WEG Automation University online classes before attending training: \n \n Pump Genius Basics \n How a Centrifugal Pump Works\n \n \n This is approximately one (1) hour of online training. \n \n\n \n  \n COURSE OBJECTIVES: Upon completion of this course\, students will be able to: \n \n Use WEG WPS and WLP software for Pump Genius\n Setup Pump Genius for Simplex\, Multipump\, and Multiplex Pump Genius on the CFW500 and CFW900.\n Identify and troubleshoot faults.\n \n\n TOPICS \n \n Overview of Pump Genius in WPS and WLP software\n Overview of the CFW500 and CFW900 Simplex System\n Overview of the CFW500 and CFW900 Multipump System\n Overview of the CFW500 and CFW900 Multiplex System\n Features of Pump Genius on the CFW320 & CFW11\n\n \n \n \n\n \n  \n This two(2) day course is conducted from 8:00 a.m. to 5:00 p.m. and includes a 30 minute lunch break each day. The training format is designed to balance theory and application\, with approximately 30% instructor-led lecture and 70% hands-on exercises. \n\n Optional: Authorized start-up for WEG Low Voltage Drives and Low Voltage Soft Starters. To participate\, you must: \n \n Be an authorized WEG distributor\, system integrator\, or OEM. \n Complete the in-person hands-on test at the end of class. The test takes up to 2 hours to complete\, but most people complete it in under 1 hour. \n Complete a computer-based test within 30 days of completing the class\, which can take up to an additional 2 hours.\n \n\n\n \n \n \n \n \n \n \n \n \n Thursday & Friday: TPD500 Installation & Programming\n \n\n \n \n \n \n \n Duration: \n 2 days \n Overview: \n This course equips participants with the knowledge and practical skills to configure\, operate\, and maintain the WEG TPD500 DC drive system. The training blends classroom instruction with hands-on exercises. \n To attend this course you must be an authorized TPD partner. \n \n \n \n\n \n \n Session Details\n Prerequisites\n Class Topics \n Class Format\n\n \n  \n Who Is This Class For: \n Product specialists and controls professionals seeking hands-on DC Drive experience. \n \n WEG Training Safety Policy\n WEG offers a variety of training classes that involve hands-on work with low-level voltages (120 VAC\, 208 VAC\, and 460 VAC). To safeguard participants during these sessions\, WEG adheres to an Arc Flash Policy aligned with the standards set forth in NFPA 70E.\n\nAs part of these safety requirements\, all students must wear non-melting\, untreated\, natural fiber long pants while attending class. This clothing standard is mandatory to ensure personal protection when working with training equipment.\n \n \n \n\n \n   \n The student completed the following WEG Automation University online classes before attending training: \n \n Electrical Basics \n Electrical Safety\n Electrical Drawings\n Common Standards\n Basics of Circuit Protection\n Motor Basics\n DC Motor Basics\n WEG TPR500 Overview\n \n \n This is approximately five (5) hours of online training. \n \n\n \n  \n COURSE OBJECTIVES: Upon successful completion of this course\, participants will be able to: \n \n Learn how to select\, configure\, and maintain TPD500 drives\n Know how to use WEG_Express software for drive configuration\, monitoring\, and diagnostics\n Learn how to perform effective troubleshooting and maintenance procedures to reduce downtime\n Implement control strategies for common DC motor applications\, including winder systems\n \n \n\n TOPICS \n \n Overview of WEG_Express software\n Overview of the TPD500 family of drives\n HMI Navigation\n Basic parameters\n Fault descriptions and troubleshooting\n\n \n \n \n \n\n \n  \n This two(2) day course is conducted from 8:00 a.m. to 5:00 p.m. and includes a 30 minute lunch break each day. The training format is designed to balance theory and application\, with approximately 30% instructor-led lecture and 70% hands-on exercises. \n\n Optional: Authorized start-up for the WEG TPD500. To participate\, you must: \n \n Be an authorized WEG distributor\, system integrator\, or OEM. \n Complete the in-person hands-on test at the end of class. The test takes up to 2 hours to complete\, but most people complete it in under 1 hour. \n Complete a computer-based test within 30 days of completing the class\, which can take up to an additional 2 hours.\n \n\n\n \n \n \n \n \n \n\nNeed More Help? Click here for Training Event Support \n\n \n\n \n *** DO NOT BOOK ANY TRAVEL UNTIL YOU RECIVE CONFIRMATION EMAIL *** \n \n You will receive an email 3-4 weeks before the event confirming the event. If you register less than 4 weeks before the event you will be notified as soon as possible. \n All travel costs including but not limited to flights\, car rentals\, hotel\, and meals not during training are the responsibility of the attendee. URL:https://wegconnect.net/ip-events/chicago-il-regional-training/ LOCATION:Chicago\, Chicago\, IL\, United States CATEGORIES:Distributor,Training ATTACH;FMTTYPE=image/png:https://wegconnect.net/wp-content/uploads/2026/01/Regional-Training-3-scaled-e1767967072535.png ORGANIZER;CN="WEG Electric Corp":MAILTO:automationtech@weg.net END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260824T083000 DTEND;TZID=America/New_York:20260828T160000 DTSTAMP:20260404T095257 CREATED:20241217T190950Z LAST-MODIFIED:20251218T195306Z UID:4405-1787560200-1787932800@wegconnect.net SUMMARY:LV Drives and LV and MV SS Service Center Training. DESCRIPTION:This class will give the participant detailed understanding of WEG drives for a service technician. Topics will range from basic commissioning to troubleshooting and maintaining general-purpose drives. Through hands on training\, the student will learn troubleshooting of common problems as well as replacement of common parts in the drive. Upon successful completion\, the student will be able to commission\, maintain and troubleshoot and repair WEG drives in common applications. The class is required for a certified Service Center technician. \nAttendees will also be automatically enrolled in the SSW7000 Medium Voltage Soft Starter – Start-up and Troubleshooting class providing students the opportunity to control and operate the WEG SSW7000 soft-starter\, understand and navigate programming hierarchy\, perform oriented start-ups\, and identify and troubleshoot basic faults.  Participation in this class is optional\, but recommended. \nObjectives: Train professionals to commission\, troubleshoot and repair the WEG LV drives\, Soft Starts and Panels and MV Soft Staters.  Participants who successfully complete the course will be authorized to start-up WEG Low Voltage Drives and Low and Medium Voltage Soft Starters. \nWho Should Attend:  WEG Authorized Automation Service Partners or those seeking to become Authorized \nPrerequisites: Completion and approval of the Automation Service Candidate Registration Form and WEG visit to candidate facility. \nTo begin the process please complete this form: Candidate Registration Form \n. \nDuration:  5 Days \nWEG Low Voltage Products Service Partner Training Syllabus \nTraining\, Travel\, and Housing Logistics FAQ \n*PLEASE DO NOT BOOK FLIGHT OR ACCOMMODATIONS BEFORE CONFIRMATION* URL:https://wegconnect.net/ip-events/low-voltage-service-center-training-4/ LOCATION:WEG Electric US Headquarters\, 6655 Sugarloaf Parkway\, Duluth\, GA\, 27502\, United States CATEGORIES:Distributor,Training ATTACH;FMTTYPE=image/jpeg:https://wegconnect.net/wp-content/uploads/2023/03/Training-e1679601405523.jpg ORGANIZER;CN="WEG Electric Corp":MAILTO:automationtech@weg.net END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260908T080000 DTEND;TZID=America/New_York:20260911T170000 DTSTAMP:20260404T095257 CREATED:20260114T125345Z LAST-MODIFIED:20260114T150219Z UID:6704-1788854400-1789146000@wegconnect.net SUMMARY:Medium Voltage Drives & Soft-Starters Programming/Installation – Online Training via Microsoft Teams DESCRIPTION:This course provides participants with a comprehensive understanding of WEG medium-voltage drives and soft starters from a service and commissioning perspective. Designed for technicians and engineers\, the training covers installation\, programming\, preventive maintenance\, and troubleshooting of WEG MV products\, including MVW-01\, MVW-01 G4\, MVW3000\, MVW3000 G4\, and the SSW7000 soft starter. \nParticipants will gain hands-on knowledge navigating HMI interfaces\, reading and diagnosing parameters\, performing oriented start-ups\, and identifying and resolving common faults and alarms. Upon successful completion\, students will be prepared to commission\, maintain\, and troubleshoot WEG medium-voltage drives and soft starters in common industrial applications. \nObjectives \n\nTrain professionals to troubleshoot and service WEG medium-voltage drives and soft starters\nBuild confidence in diagnostics and preventative maintenance for MV applications\n\nWho Should Attend \n\n\nTechnicians or engineers with experience in low- or medium-voltage drives and soft starters \n\n\nWEG Authorized Automation Service Partners or those seeking authorization \n\n\nPrerequisites \n**In order to attend\, participants must complete and submit this form: WEG Drives and Softstarters Application Form ** \n\nModule 1 (LV – Online) completion\, or\n\nMinimum one year of experience with low-voltage drives and soft starters (any brand)\, or \n\n\nMinimum one year of experience with medium-voltage drives and soft starters (any brand) \n\n\nTraining Format\n \n\nOnline\n\nTotal training time: 24 hours \n\n\nRequired materials: \n\n\nLaptop with webcam and microphone URL:https://wegconnect.net/ip-events/medium-voltage-drives-soft-starters-programming-installation-online-training-via-microsoft-teams-4/ LOCATION:Microsoft Teams CATEGORIES:Service Center,Training ATTACH;FMTTYPE=image/jpeg:https://wegconnect.net/wp-content/uploads/2023/03/Training-e1679601405523.jpg ORGANIZER;CN="WEG Electric Corp":MAILTO:automationtech@weg.net END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260922T080000 DTEND;TZID=America/New_York:20260925T170000 DTSTAMP:20260404T095257 CREATED:20260109T182758Z LAST-MODIFIED:20260116T134259Z UID:6663-1790064000-1790355600@wegconnect.net SUMMARY:Boston\, MA - Regional Training DESCRIPTION:Welcome to the signup for WEG Automation University Regional Training in Duluth\, GA. \n Please review the following important information before registering: \n\n \n Registration is required to attend any class.\n Two (2) training rooms will be running concurrently\, so please ensure you do not select classes with overlapping times.\n If a class appears more than once on the schedule\, it is being offered multiple times during the week.\n Completion of required online training is mandatory prior to attending in-person regional training.\n Do not book travel or lodging until you receive confirmation that you are enrolled in the class and all prerequisites have been completed. A confirmation email will be sent once you are cleared to proceed.\n \n\n \n Schedule for Week\n \n \n Room Tuesday Wednesday Thursday Friday \n \n Room 1 Drives & Soft Starters Pump Genius \n Room 2 WEG Automation Products Selection and Sizing TPD500 Installation and Programming \n \n\n Class Descriptions\n\n \n \n \n Tuesday: Product Selection & Sizing \n \n\n \n \n Duration: \n One (1) day \n Overview: \n Learn how to select and size automation products effectively. This course covers combination starters\, contactors\, VFDs\, soft starters and more. This class is reinforced through hands-on labs. \n \n\n \n \n \n \n\n \n \n Session Details\n Prerequisites\n Class Topics \n Class Format\n\n \n  \n Who Is This Class For: \n Inside sales\, outside sales\, product specialists\, and engineers involved in motor control and panel design. \n \n\n \n   \n The student completed the following online classes before attending training: \n \n Electrical Basics \n Electrical Safety\n Electrical Drawings\n Common Standards\n Basics of Circuit Protection\n Power Factor Basics\n Motor Starting Methods\n Soft Start Basics\n VFD Basics\n Motor Basics\n WEG Control Product Overview\n WEG Drives and Soft Starter Overview\n \n \n This is approximately six (6) hours of online training. \n \n\n \n  \n COURSE OBJECTIVES: Upon completion of this course\, students will be able to: \n \n Select the best motor control solution for your application.\n Properly size a VFD\n Properly size a soft starter\n Learn available tools and resources to assist in specification and selling efforts.\n \n\n TOPICS \n \n Selecting the correct contactor and accessories\n Assembling a contactor\n Selecting the correct variable frequency drive (VFD)\n Selecting the correct soft starter\n \n \n \n\n \n  \n This one (1) day course is conducted from 8:00 a.m. to 5:00 p.m. and includes a 30 minute lunch break. The training format is designed to balance theory and application\, with approximately 70% instructor-led lecture and 30% hands-on exercises. \n \n\n \n \n \n \n \n \n Tuesday & Wednesday: Drives & Soft Starters \n \n\n \n \n \n \n \n \n \n Duration: \n Two (2) days \n Overview: \n Hands-on training covering WEG VFDs and soft starters\, focusing on installation\, startup\, and configuration of low-voltage drives.This class is only for the CFW and SSW product lines. \n \n\n \n\n \n \n Session Details\n Prerequisites\n Class Topics \n Class Format\n\n \n   \n Who Is This Class For: \n Product specialists and controls professionals seeking hands-on drive setup experience. \n \n WEG Training Safety Policy\n WEG offers a variety of training classes that involve hands-on work with low-level voltages (120 VAC\, 208 VAC\, and 460 VAC). To safeguard participants during these sessions\, WEG adheres to an Arc Flash Policy aligned with the standards set forth in NFPA 70E.\n\nAs part of these safety requirements\, all students must wear non-melting\, untreated\, natural fiber long pants while attending class. This clothing standard is mandatory to ensure personal protection when working with training equipment.\n \n \n \n\n \n  \n The student completed the following WEG Automation University online classe before attending training: \n \n Electrical Basics \n Electrical Safety\n Basics of Circuit Protection\n Motor Starting Methods\n Soft Start Basics\n VFD Basics\n Motor Basics\n WEG Drives and Soft Starter Overview\n SSW05 Product Overview\n SSW07 Product Overview\n SSW900 Product Overview\n CFW11 Product Overview\n CFW100 Product Overview\n CFW320 Product Overview\n CFW500 Product Overview\n CFW900 Product Overview\n \n \n This is approximately eight (8) hours of online training. \n \n\n \n  \n COURSE OBJECTIVES: Upon completion of this course\, students will be able to: \n \n Control and operate the WEG family of drives and soft starters\n Understand and navigate the programming hierarchy\n Perform oriented start-ups\n Use of WEG WPS software\n Identify and troubleshoot faults\n \n\n TOPICS \n \n Soft Starters (SSW07 & SSW900 Focused)\n Drives (CFW320\, CFW500\, & CFW900 Focused)\n HMI Navigation\n Oriented start-up\n Basic parameters\n PID control \n Networking Basics\n Fault descriptions and troubleshooting\n Using WEG WPS software\n\n \n \n \n\n \n  \n This two(2) day course is conducted from 8:00 a.m. to 5:00 p.m. and includes a 30 minute lunch break each day. The training format is designed to balance theory and application\, with approximately 30% instructor-led lecture and 70% hands-on exercises. \n\n Optional: Authorized start-up for WEG Low Voltage Drives and Low Voltage Soft Starters. To participate\, you must: \n \n Be an authorized WEG distributor\, system integrator\, or OEM. \n Complete the in-person hands-on test at the end of class. The test takes up to 2 hours to complete\, but most people complete it in under 1 hour. \n Complete a computer-based test within 30 days of completing the class\, which can take up to an additional 2 hours.\n \n\n\n \n \n \n \n \n \n \n \n \n \n\n \n \n \n \n \n Thursday & Friday: Pump Genius\n \n\n \n .\n Duration: \n Two (2) days \n Overview: \n Learn configuration and application of WEG’s Pump Genius through practical exercises. This class will cover Pump Genius on the CFW11\, CFW320\, CFW500\, and CFW900. \n \n\n \n \n \n \n\n \n \n Session Details\n Prerequisites\n Class Topics \n Class Format\n\n \n  \n Who Is This Class For: \n Product specialists and controls professionals who have completed Basic Drives & Soft Starters. \n \n WEG Training Safety Policy\n WEG offers a variety of training classes that involve hands-on work with low-level voltages (120 VAC\, 208 VAC\, and 460 VAC). To safeguard participants during these sessions\, WEG adheres to an Arc Flash Policy aligned with the standards set forth in NFPA 70E.\n\nAs part of these safety requirements\, all students must wear non-melting\, untreated\, natural fiber long pants while attending class. This clothing standard is mandatory to ensure personal protection when working with training equipment.\n \n \n \n\n \n  \n The student completed the following WEG Automation University online classes before attending training: \n \n Pump Genius Basics \n How a Centrifugal Pump Works\n \n \n This is approximately one (1) hour of online training. \n \n\n \n  \n COURSE OBJECTIVES: Upon completion of this course\, students will be able to: \n \n Use WEG WPS and WLP software for Pump Genius\n Setup Pump Genius for Simplex\, Multipump\, and Multiplex Pump Genius on the CFW500 and CFW900.\n Identify and troubleshoot faults.\n \n\n TOPICS \n \n Overview of Pump Genius in WPS and WLP software\n Overview of the CFW500 and CFW900 Simplex System\n Overview of the CFW500 and CFW900 Multipump System\n Overview of the CFW500 and CFW900 Multiplex System\n Features of Pump Genius on the CFW320 & CFW11\n\n \n \n \n\n \n  \n This two(2) day course is conducted from 8:00 a.m. to 5:00 p.m. and includes a 30 minute lunch break each day. The training format is designed to balance theory and application\, with approximately 30% instructor-led lecture and 70% hands-on exercises. \n\n Optional: Authorized start-up for WEG Low Voltage Drives and Low Voltage Soft Starters. To participate\, you must: \n \n Be an authorized WEG distributor\, system integrator\, or OEM. \n Complete the in-person hands-on test at the end of class. The test takes up to 2 hours to complete\, but most people complete it in under 1 hour. \n Complete a computer-based test within 30 days of completing the class\, which can take up to an additional 2 hours.\n \n\n\n \n \n \n \n \n \n \n \n \n Thursday & Friday: TPD500 Installation & Programming\n \n\n \n \n \n \n \n Duration: \n 2 days \n Overview: \n This course equips participants with the knowledge and practical skills to configure\, operate\, and maintain the WEG TPD500 DC drive system. The training blends classroom instruction with hands-on exercises. \n To attend this course you must be an authorized TPD partner. \n \n \n \n\n \n \n Session Details\n Prerequisites\n Class Topics \n Class Format\n\n \n  \n Who Is This Class For: \n Product specialists and controls professionals seeking hands-on DC Drive experience. \n \n WEG Training Safety Policy\n WEG offers a variety of training classes that involve hands-on work with low-level voltages (120 VAC\, 208 VAC\, and 460 VAC). To safeguard participants during these sessions\, WEG adheres to an Arc Flash Policy aligned with the standards set forth in NFPA 70E.\n\nAs part of these safety requirements\, all students must wear non-melting\, untreated\, natural fiber long pants while attending class. This clothing standard is mandatory to ensure personal protection when working with training equipment.\n \n \n \n\n \n   \n The student completed the following WEG Automation University online classes before attending training: \n \n Electrical Basics \n Electrical Safety\n Electrical Drawings\n Common Standards\n Basics of Circuit Protection\n Motor Basics\n DC Motor Basics\n WEG TPR500 Overview\n \n \n This is approximately five (5) hours of online training. \n \n\n \n  \n COURSE OBJECTIVES: Upon successful completion of this course\, participants will be able to: \n \n Learn how to select\, configure\, and maintain TPD500 drives\n Know how to use WEG_Express software for drive configuration\, monitoring\, and diagnostics\n Learn how to perform effective troubleshooting and maintenance procedures to reduce downtime\n Implement control strategies for common DC motor applications\, including winder systems\n \n \n\n\n TOPICS \n \n Overview of WEG_Express software\n Overview of the TPD500 family of drives\n HMI Navigation\n Basic parameters\n Fault descriptions and troubleshooting\n\n \n \n \n\n \n  \n This two(2) day course is conducted from 8:00 a.m. to 5:00 p.m. and includes a 30 minute lunch break each day. The training format is designed to balance theory and application\, with approximately 30% instructor-led lecture and 70% hands-on exercises. \n\n Optional: Authorized start-up for the WEG TPD500. To participate\, you must: \n \n Be an authorized WEG distributor\, system integrator\, or OEM. \n Complete the in-person hands-on test at the end of class. The test takes up to 2 hours to complete\, but most people complete it in under 1 hour. \n Complete a computer-based test within 30 days of completing the class\, which can take up to an additional 2 hours.\n \n\n\n \n \n \n \n \n \n\nNeed More Help? Click here for Training Event Support \n\n \n\n \n *** DO NOT BOOK ANY TRAVEL UNTIL YOU RECIVE CONFIRMATION EMAIL *** \n \n You will receive an email 3-4 weeks before the event confirming the event. If you register less than 4 weeks before the event you will be notified as soon as possible. \n All travel costs including but not limited to flights\, car rentals\, hotel\, and meals not during training are the responsibility of the attendee. URL:https://wegconnect.net/ip-events/boston-ma-regional-training/ LOCATION:Boston\, Boston\, MA\, United States CATEGORIES:Distributor,Training ATTACH;FMTTYPE=image/png:https://wegconnect.net/wp-content/uploads/2026/01/Regional-Training-4-scaled-e1767983262234.png ORGANIZER;CN="WEG Electric Corp":MAILTO:automationtech@weg.net END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20261026T083000 DTEND;TZID=America/New_York:20261030T160000 DTSTAMP:20260404T095257 CREATED:20250422T193124Z LAST-MODIFIED:20251218T185912Z UID:5024-1793003400-1793376000@wegconnect.net SUMMARY:LV Drives and LV and MV SS Service Center Training. DESCRIPTION:This class will give the participant detailed understanding of WEG drives for a service technician. Topics will range from basic commissioning to troubleshooting and maintaining general-purpose drives. Through hands on training\, the student will learn troubleshooting of common problems as well as replacement of common parts in the drive. Upon successful completion\, the student will be able to commission\, maintain and troubleshoot and repair WEG drives in common applications. The class is required for a certified Service Center technician. \nAttendees will also be automatically enrolled in the SSW7000 Medium Voltage Soft Starter – Start-up and Troubleshooting class providing students the opportunity to control and operate the WEG SSW7000 soft-starter\, understand and navigate programming hierarchy\, perform oriented start-ups\, and identify and troubleshoot basic faults.  Participation in this class is optional\, but recommended. \nObjectives: Train professionals to commission\, troubleshoot and repair the WEG LV drives\, Soft Starts and Panels and MV Soft Staters.  Participants who successfully complete the course will be authorized to start-up WEG Low Voltage Drives and Low and Medium Voltage Soft Starters. \nWho Should Attend:  WEG Authorized Automation Service Partners or those seeking to become Authorized \nPrerequisites: Completion and approval of the Automation Service Candidate Registration Form and WEG visit to candidate facility. \nTo begin the process please complete this form: Candidate Registration Form \nDuration:  5 Days \nWEG Low Voltage Products Service Partner Training Syllabus \nTraining\, Travel\, and Housing Logistics FAQ \n*PLEASE DO NOT BOOK FLIGHT OR ACCOMMODATIONS BEFORE CONFIRMATION* URL:https://wegconnect.net/ip-events/lv-drives-and-lv-and-mv-ss-service-center-training/ LOCATION:WEG Electric US Headquarters\, 6655 Sugarloaf Parkway\, Duluth\, GA\, 27502\, United States ATTACH;FMTTYPE=image/jpeg:https://wegconnect.net/wp-content/uploads/2023/03/Training-e1679601405523.jpg ORGANIZER;CN="WEG Electric Corp":MAILTO:automationtech@weg.net END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20261102T080000 DTEND;TZID=America/New_York:20261106T170000 DTSTAMP:20260404T095257 CREATED:20260114T125542Z LAST-MODIFIED:20260114T150152Z UID:6707-1793606400-1793984400@wegconnect.net SUMMARY:Medium Voltage Drives & Soft-Starters Programming/Installation – Online Training via Microsoft Teams DESCRIPTION:This course provides participants with a comprehensive understanding of WEG medium-voltage drives and soft starters from a service and commissioning perspective. Designed for technicians and engineers\, the training covers installation\, programming\, preventive maintenance\, and troubleshooting of WEG MV products\, including MVW-01\, MVW-01 G4\, MVW3000\, MVW3000 G4\, and the SSW7000 soft starter. \nParticipants will gain hands-on knowledge navigating HMI interfaces\, reading and diagnosing parameters\, performing oriented start-ups\, and identifying and resolving common faults and alarms. Upon successful completion\, students will be prepared to commission\, maintain\, and troubleshoot WEG medium-voltage drives and soft starters in common industrial applications. \nObjectives \n\nTrain professionals to troubleshoot and service WEG medium-voltage drives and soft starters\nBuild confidence in diagnostics and preventative maintenance for MV applications\n\nWho Should Attend \n\n\nTechnicians or engineers with experience in low- or medium-voltage drives and soft starters \n\n\nWEG Authorized Automation Service Partners or those seeking authorization \n\n\nPrerequisites \n**In order to attend\, participants must complete and submit this form: WEG Drives and Softstarters Application Form ** \n\nModule 1 (LV – Online) completion\, or\n\nMinimum one year of experience with low-voltage drives and soft starters (any brand)\, or \n\n\nMinimum one year of experience with medium-voltage drives and soft starters (any brand) \n\n\nTraining Format\n \n\nOnline\n\nTotal training time: 24 hours \n\n\nRequired materials: \n\n\nLaptop with webcam and microphone URL:https://wegconnect.net/ip-events/medium-voltage-drives-soft-starters-programming-installation-online-training-via-microsoft-teams-5/ LOCATION:Microsoft Teams CATEGORIES:Service Center,Training ATTACH;FMTTYPE=image/jpeg:https://wegconnect.net/wp-content/uploads/2023/03/Training-e1679601405523.jpg ORGANIZER;CN="WEG Electric Corp":MAILTO:automationtech@weg.net END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20261103T110000 DTEND;TZID=America/New_York:20261106T200000 DTSTAMP:20260404T095257 CREATED:20260109T183404Z LAST-MODIFIED:20260116T134336Z UID:6671-1793703600-1793995200@wegconnect.net SUMMARY:Las Vegas\, NV - Regional Training DESCRIPTION:Welcome to the signup for WEG Automation University Regional Training in Duluth\, GA. \n Please review the following important information before registering: \n\n \n Registration is required to attend any class.\n Two (2) training rooms will be running concurrently\, so please ensure you do not select classes with overlapping times.\n If a class appears more than once on the schedule\, it is being offered multiple times during the week.\n Completion of required online training is mandatory prior to attending in-person regional training.\n Do not book travel or lodging until you receive confirmation that you are enrolled in the class and all prerequisites have been completed. A confirmation email will be sent once you are cleared to proceed.\n \n\n \n Schedule for Week\n \n \n Room Tuesday Wednesday Thursday Friday \n \n Room 1 Drives & Soft Starters Pump Genius \n Room 2 WEG Automation Products Selection and Sizing TPD500 Installation and Programming \n \n\n Class Descriptions\n\n \n \n \n Tuesday: Product Selection & Sizing \n \n\n \n \n Duration: \n One (1) day \n Overview: \n Learn how to select and size automation products effectively. This course covers combination starters\, contactors\, VFDs\, soft starters and more. This class is reinforced through hands-on labs. \n \n\n \n \n \n \n\n \n \n Session Details\n Prerequisites\n Class Topics \n Class Format\n\n \n  \n Who Is This Class For: \n Inside sales\, outside sales\, product specialists\, and engineers involved in motor control and panel design. \n \n\n \n   \n The student completed the following online classes before attending training: \n \n Electrical Basics \n Electrical Safety\n Electrical Drawings\n Common Standards\n Basics of Circuit Protection\n Power Factor Basics\n Motor Starting Methods\n Soft Start Basics\n VFD Basics\n Motor Basics\n WEG Control Product Overview\n WEG Drives and Soft Starter Overview\n \n \n This is approximately six (6) hours of online training. \n \n\n \n  \n COURSE OBJECTIVES: Upon completion of this course\, students will be able to: \n \n Select the best motor control solution for your application.\n Properly size a VFD\n Properly size a soft starter\n Learn available tools and resources to assist in specification and selling efforts.\n \n\n TOPICS \n \n Selecting the correct contactor and accessories\n Assembling a contactor\n Selecting the correct variable frequency drive (VFD)\n Selecting the correct soft starter\n \n \n \n\n \n  \n This one (1) day course is conducted from 8:00 a.m. to 5:00 p.m. and includes a 30 minute lunch break. The training format is designed to balance theory and application\, with approximately 70% instructor-led lecture and 30% hands-on exercises. \n \n\n \n \n \n \n \n \n Tuesday & Wednesday: Drives & Soft Starters \n \n\n \n \n \n \n \n \n \n Duration: \n Two (2) days \n Overview: \n Hands-on training covering WEG VFDs and soft starters\, focusing on installation\, startup\, and configuration of low-voltage drives.This class is only for the CFW and SSW product lines. \n \n\n \n\n \n \n Session Details\n Prerequisites\n Class Topics \n Class Format\n\n \n   \n Who Is This Class For: \n Product specialists and controls professionals seeking hands-on drive setup experience. \n \n WEG Training Safety Policy\n WEG offers a variety of training classes that involve hands-on work with low-level voltages (120 VAC\, 208 VAC\, and 460 VAC). To safeguard participants during these sessions\, WEG adheres to an Arc Flash Policy aligned with the standards set forth in NFPA 70E.\n\nAs part of these safety requirements\, all students must wear non-melting\, untreated\, natural fiber long pants while attending class. This clothing standard is mandatory to ensure personal protection when working with training equipment.\n \n \n \n\n \n  \n The student completed the following WEG Automation University online classe before attending training: \n \n Electrical Basics \n Electrical Safety\n Basics of Circuit Protection\n Motor Starting Methods\n Soft Start Basics\n VFD Basics\n Motor Basics\n WEG Drives and Soft Starter Overview\n SSW05 Product Overview\n SSW07 Product Overview\n SSW900 Product Overview\n CFW11 Product Overview\n CFW100 Product Overview\n CFW320 Product Overview\n CFW500 Product Overview\n CFW900 Product Overview\n \n \n This is approximately eight (8) hours of online training. \n \n\n \n  \n COURSE OBJECTIVES: Upon completion of this course\, students will be able to: \n \n Control and operate the WEG family of drives and soft starters\n Understand and navigate the programming hierarchy\n Perform oriented start-ups\n Use of WEG WPS software\n Identify and troubleshoot faults\n \n\n TOPICS \n \n Soft Starters (SSW07 & SSW900 Focused)\n Drives (CFW320\, CFW500\, & CFW900 Focused)\n HMI Navigation\n Oriented start-up\n Basic parameters\n PID control \n Networking Basics\n Fault descriptions and troubleshooting\n Using WEG WPS software\n\n \n \n \n\n \n  \n This two(2) day course is conducted from 8:00 a.m. to 5:00 p.m. and includes a 30 minute lunch break each day. The training format is designed to balance theory and application\, with approximately 30% instructor-led lecture and 70% hands-on exercises. \n\n Optional: Authorized start-up for WEG Low Voltage Drives and Low Voltage Soft Starters. To participate\, you must: \n \n Be an authorized WEG distributor\, system integrator\, or OEM. \n Complete the in-person hands-on test at the end of class. The test takes up to 2 hours to complete\, but most people complete it in under 1 hour. \n Complete a computer-based test within 30 days of completing the class\, which can take up to an additional 2 hours.\n \n\n\n \n \n \n \n \n \n \n \n \n \n\n \n \n \n \n \n Thursday & Friday: Pump Genius\n \n\n \n .\n Duration: \n Two (2) days \n Overview: \n Learn configuration and application of WEG’s Pump Genius through practical exercises. This class will cover Pump Genius on the CFW11\, CFW320\, CFW500\, and CFW900. \n \n\n \n \n \n \n\n \n \n Session Details\n Prerequisites\n Class Topics \n Class Format\n\n \n  \n Who Is This Class For: \n Product specialists and controls professionals who have completed Basic Drives & Soft Starters. \n \n WEG Training Safety Policy\n WEG offers a variety of training classes that involve hands-on work with low-level voltages (120 VAC\, 208 VAC\, and 460 VAC). To safeguard participants during these sessions\, WEG adheres to an Arc Flash Policy aligned with the standards set forth in NFPA 70E.\n\nAs part of these safety requirements\, all students must wear non-melting\, untreated\, natural fiber long pants while attending class. This clothing standard is mandatory to ensure personal protection when working with training equipment.\n \n \n \n\n \n  \n The student completed the following WEG Automation University online classes before attending training: \n \n Pump Genius Basics \n How a Centrifugal Pump Works\n \n \n This is approximately one (1) hour of online training. \n \n\n \n  \n COURSE OBJECTIVES: Upon completion of this course\, students will be able to: \n \n Use WEG WPS and WLP software for Pump Genius\n Setup Pump Genius for Simplex\, Multipump\, and Multiplex Pump Genius on the CFW500 and CFW900.\n Identify and troubleshoot faults.\n \n\n TOPICS \n \n Overview of Pump Genius in WPS and WLP software\n Overview of the CFW500 and CFW900 Simplex System\n Overview of the CFW500 and CFW900 Multipump System\n Overview of the CFW500 and CFW900 Multiplex System\n Features of Pump Genius on the CFW320 & CFW11\n\n \n \n \n\n \n  \n This two(2) day course is conducted from 8:00 a.m. to 5:00 p.m. and includes a 30 minute lunch break each day. The training format is designed to balance theory and application\, with approximately 30% instructor-led lecture and 70% hands-on exercises. \n\n Optional: Authorized start-up for WEG Low Voltage Drives and Low Voltage Soft Starters. To participate\, you must: \n \n Be an authorized WEG distributor\, system integrator\, or OEM. \n Complete the in-person hands-on test at the end of class. The test takes up to 2 hours to complete\, but most people complete it in under 1 hour. \n Complete a computer-based test within 30 days of completing the class\, which can take up to an additional 2 hours.\n \n\n\n \n \n \n \n \n \n \n \n \n Thursday & Friday: TPD500 Installation & Programming\n \n\n \n \n \n \n \n Duration: \n 2 days \n Overview: \n This course equips participants with the knowledge and practical skills to configure\, operate\, and maintain the WEG TPD500 DC drive system. The training blends classroom instruction with hands-on exercises. \n To attend this course you must be an authorized TPD partner. \n \n \n \n\n \n \n Session Details\n Prerequisites\n Class Topics \n Class Format\n\n \n  \n Who Is This Class For: \n Product specialists and controls professionals seeking hands-on DC Drive experience. \n \n WEG Training Safety Policy\n WEG offers a variety of training classes that involve hands-on work with low-level voltages (120 VAC\, 208 VAC\, and 460 VAC). To safeguard participants during these sessions\, WEG adheres to an Arc Flash Policy aligned with the standards set forth in NFPA 70E.\n\nAs part of these safety requirements\, all students must wear non-melting\, untreated\, natural fiber long pants while attending class. This clothing standard is mandatory to ensure personal protection when working with training equipment.\n \n \n \n\n \n   \n The student completed the following WEG Automation University online classes before attending training: \n \n Electrical Basics \n Electrical Safety\n Electrical Drawings\n Common Standards\n Basics of Circuit Protection\n Motor Basics\n DC Motor Basics\n WEG TPR500 Overview\n \n \n This is approximately five (5) hours of online training. \n \n\n \n  \n COURSE OBJECTIVES: Upon successful completion of this course\, participants will be able to: \n \n Learn how to select\, configure\, and maintain TPD500 drives\n Know how to use WEG_Express software for drive configuration\, monitoring\, and diagnostics\n Learn how to perform effective troubleshooting and maintenance procedures to reduce downtime\n Implement control strategies for common DC motor applications\, including winder systems\n \n \n\n\n TOPICS \n \n Overview of WEG_Express software\n Overview of the TPD500 family of drives\n HMI Navigation\n Basic parameters\n Fault descriptions and troubleshooting\n\n \n \n \n\n \n  \n This two(2) day course is conducted from 8:00 a.m. to 5:00 p.m. and includes a 30 minute lunch break each day. The training format is designed to balance theory and application\, with approximately 30% instructor-led lecture and 70% hands-on exercises. \n\n Optional: Authorized start-up for the WEG TPD500. To participate\, you must: \n \n Be an authorized WEG distributor\, system integrator\, or OEM. \n Complete the in-person hands-on test at the end of class. The test takes up to 2 hours to complete\, but most people complete it in under 1 hour. \n Complete a computer-based test within 30 days of completing the class\, which can take up to an additional 2 hours.\n \n\n\n \n \n \n \n \n \n\nNeed More Help? Click here for Training Event Support \n\n \n\n \n *** DO NOT BOOK ANY TRAVEL UNTIL YOU RECIVE CONFIRMATION EMAIL *** \n \n You will receive an email 3-4 weeks before the event confirming the event. If you register less than 4 weeks before the event you will be notified as soon as possible. \n All travel costs including but not limited to flights\, car rentals\, hotel\, and meals not during training are the responsibility of the attendee. URL:https://wegconnect.net/ip-events/las-vegas-nv-regional-training/ LOCATION:DoubleTree by Hilton Las Vegas Airport\, 7250 Pollock Dr\, Las Vegas\, 89119\, United States CATEGORIES:Distributor,Training ATTACH;FMTTYPE=image/png:https://wegconnect.net/wp-content/uploads/2025/06/Regional-Training-2.png ORGANIZER;CN="WEG Electric Corp":MAILTO:automationtech@weg.net END:VEVENT END:VCALENDAR